DODGE SF4S-IP-300RE Flange Block Bearings

s1:33.4 mm; H2:100 mm; H1:13 mm; S:9 mm; N:M12; C:22.8 kN; A:48 mm; d:38.1 mm; B:30.2 mm; J:89 mm;

Designation of bearing:UC214-43G2T20; s1:37.3 mm; J:150 mm; C0:45 kN; B:74.6 mm; A1:18 mm; Recommended tightening torque for set screw:27.1 Nm; A:56 mm; d:68.26 mm; e:38 mm;

Oil Holes:6 mm; Da:299 mm; Inner rings PCD:240 mm; Mounting Hole Countersink Diameter:20 mm; D:380 mm; Mounting Hole Size:14 mm; Static Load Rating:286.2 kN; Dynamic Load Rating:142 kN; d:210 mm; B:40 mm;

H:161 mm; J:130 mm; Recommended tightening torque for set screw:5.5 Nm; A:34 mm; T max.:100 °C; B:32 mm; A2:42.5 mm; Designation of open end cover:SCO207-35; Dz:80 mm; S:8.5 mm;

Category:Cam Followers; Cam Follower Shape:Flat Type; Shaft:Presence; Tightening Method:With Head Hexagonal; Cam follower stud diameter G(mm):M10; Seal:None; Roller Lining:No; Seal:None; Shaft:Presence; Category:Cam Followers;

B:50; Surface Treatment:No; Bearing Unit, Type:Pillow Type; Rolling Element Material:Bearing Steel; Grease Type:SH44M; Basic Load Rating, Dynamic Rating(N):26700; Days to Ship:8 Days; d:25; Accessory:With cast iron cover; Seal:Silicone;

Shape:Hex; Type:Lock Nuts; Screw Type:Metric (Coarse) Thre; Volume Discount:Available; Volume Discount:Available; Thread Nominal M(mm):M24×3; RoHS:6; Type:Lock Nuts; Material:[Stainless Steel] 30; Shape:Hex;

Symbol of Bearing Ring Shape:No; Seal, Shield Symbols:No; Inner/Outer Ring Material:Steel; Rolling Element Material:Steel; Symbols of Lubrication Amount:No; Rolling Element Material:Steel; Symbol of contact angle:No; Outer Ring:With Outer Ring; Clearance sign:C3; Acoustic Symbol:No;

Combination symbol:No; Basic Dynamic Load Rating(N):157000; Outer Ring:With Outer Ring; Type:Angular Contact Ball; Precision:Grade 5; Days to Ship:8 Days; Load Direction:Radial; Preload Mark:No; Outer Ring Shape:Flat; Spacer, Sleeve symbol:No;

Bearing Part Number:608; Number of Bearings:Double; Seals:VV (Non-Contact Rubb; Bearing I.D. d(mm):8; Shape:Flange Type; Type:Bearings with Housin; Width T(mm):25 ～ 35; Holder Surface Treatment:Clear Anodize; Bearing Material:[Steel] Steel; Days to Ship:7 Days;

Holder Surface Treatment:Clear Anodize; Shape:Flanged Pilot Type; Days to Ship:7 Days; Volume Discount:Available; Bearing I.D. d(mm):15; Number of Bearings:Single; Seals:VV (Non-Contact Rubb; Bearing Part Number:6802; Shape:Flanged Pilot Type; Bearing Material:[Steel] Steel;

T max.:100 °C; A:55 mm; B1:55 mm; Adapter sleeve reference:H2310; G:M6x1; d1:70 mm; Weight:2.65 kg; N1:27 mm; N:14mm; Designation of housing:PLE210N-;

Nlim (grease):6,300 rpm; Internal Special Features:No; Inch - Metric:Metric; Other Features:Deep Groove | Double; Manufacturer Name:NTN; Da max:65.5 mm; Snap Ring:No; rs min:1.1 mm; Bore:1.378 Inch | 35 Mill; ra max:1 mm;

Flange Shape:Compact Type; Bearing Retained:Yes (with retaining; Bearing I.D. d(mm):5; Holder Surface Treatment:Clear Anodize; Flange O.D. H(φ):36; Type:Bearings with Housin; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Seals:DD (Contact Rubber S; Width T(mm):20 ～ 40;

J:100 mm; Recommended tightening torque for set screw:3.7 Nm; B:30 mm; G:M6x1; L:125 mm; T max.:200 °C; A1:9.5 mm; Designation of housing:FCE206-; T min.:-20 °C; N:11,5mm;