Hengyuan 32MCY14-1B Piston Pump

da - Cone Frontface Backing Diameter:1.63 in; Aa - Cage-Cone Backface Clearance:0.03 in; Cage Type:Stamped Steel; Cg - Geometry Factor:0.0694; a - Effective Center Location4:-0.06 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:2250 lbf; C90 - Dynamic Radial Rating (90 million revolutions

Foot Height H1:13.5 mm; Bolt Hole Length N1:23.8 mm; Seal Type:Narrow Shroud; Total Width A:1.563 in; Center of Bearing from End S:9.5 mm; Weight:2.513 lb; Dynamic Load Rating:4850 lbf; Inside Ring Outside Diameter:1.567 in; Bolt Hole Width N:14.3 mm; Bearing Type:Ball Bearing;

Dimension SA:4.03 in; Eng Internal Radial Clearance - Max:0.0039; Grease Lubrication - T Seal:2000 rpm; Oil Lubrication - B/C/O Seal:1000 rpm; Shaft Tolerance:0.0030 in; Float:0.083 in; Housing Style:Four-Bolt Square Fla; Engineering Group:Mounted Bearing; Pre Install Clearance Max:0.0039 in; Dimens

G:M6x1; Designation of housing:T309-; Designation of bearing:EX309-28G2T20; s1:42.05 mm; B1:58.7 mm; N2:55 mm; C:53 kN; L2:20 mm; B:42.9 mm; T min.:-20 °C;

Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6903; Bearing Retained:Yes (with retaining; Number of Bearings:Single; Height Indication:Height Selection; Bearing Used:Deep Groove Ball Bea; Shape:T-Shaped; Height H(mm):30 ～ 50; Days to Ship:8 Days; Bearing I.D. d(mm):17;

Shape:Flange Type; Width T(mm):25 ～ 50; Shape:Flange Type; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Flange Shape:Round Type; Days to Ship:8 Days; Housing Material:304 Stainless Steel; Bearing Material:Stainless Steel; Seals:ZZ (Double Shield);

Number of Bearings:Double; Days to Ship:8 Days; Bearing Part Number:6903; Thickness, Height Indication:T Selection, h Confi; Shape:T-Shaped; Height H(mm):25 ～ 50; Lateral Width L(mm):64; Holder Surface Treatment:Not Provided; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea;

L Dimension Tolerance:+0.000/-0.005; Surface Treatment:Black Oxide; D(inch):0.38; Days to Ship:8 Days; L Dimension Tolerance:+0.000/-0.005; Material:Low Carbon Steel; L(inch):0.125 ～ 2; RoHS:6;

s1:12.5 mm; Designation of housing:PG204N-; A:38 mm; C:12.8 kN; C0:6.65 kN; B:25 mm; Designation of open end cover:SCOU204-12; Weight:0.56 kg; Z:44.9 mm; E:16 mm;

D:42 mm; Limiting Speed (Grease):34800 rpm; da - Inner Ring Backing Diameter:28.900 mm; C0 - Static Radial Rating:5750 N; do - Ball Diameter:4.762500 mm; d:25 mm; Ball Type:STEEL; Ce - Dynamic Radial Rating1:9040 N; Bearing Weight:0.04 Kg; Limiting Speed (Oil):69600 rpm;

Designation of bearing:UK311G2H-32; H2:105 mm; N1:29 mm; d1:75 mm; T max.:100 °C; Weight:6.34 kg; Adapter sleeve reference:H2311-32; T min.:-20 °C; Designation of housing:T311-; B:43 mm;

T max.:200 °C; B:38.1 mm; s1:19.05 mm; S:15.9 mm; T min.:-20 °C; H1:18 mm; J:121 mm; A1:30 mm; d:30.16 mm; G:M6x1;

Associated sleeve reference:H3164H; Radial clearance class:C3; da min:340 mm; Mass:176.8 kg; e:0.3; Fatigue limit load, Cu:348 kN; Static load, C0:6,730 kN; rs min:5 mm; Y2:3.34; Y0:2.2;

Designation of bearing:UC205-16G2L3; A:27 mm; A1:14 mm; T min.:-20 °C; J1:51 mm; s1:17 mm; Recommended tightening torque for set screw:3.7 Nm; B:34 mm; C0:7.88 kN; J:98 mm;

A1:20 mm; B:55.6 mm; C0:44.8 kN; s1:50 mm; d:55 mm; T max.:100 °C; J:140 mm; C:71.5 kN; Weight:5.6 kg; B1:73 mm;