Vickers PV270R1K1D1NFWS Piston Pump PV

Rubber seating ring:RIS 206 A; B4:5.95 mm; d2:44.1 mm; Calculation factor f0:14; Limiting speed1):6300 r/min; r1,2 min.:0.6 mm; B1:35.7 mm; B:23.8 mm; Mass complete bearing:0.36 kg; Recommended tightening torque for grub screw:6.5 N·m;

Pa:10.9 kN; Initial grease fill:141.75 g; H1:101.6 mm; R1:60.325 mm; Cap bolt:1/2-13 UNC; Labyrinth ring:2 x LOR 186; Cap bolt, SAE grade:8; H:196.85 mm; Cap bolt recommended tightening torque:149.1 N·m; h:38.1 mm;

D:80.0000 mm; Fillet Radius ra:1.00 mm; B:16.00 mm; Basic Dynamic Radial Load Rating C:24700 N; Accessories:Snap-Ring; Oil Speed Rating Open/Shielded n2:10000 rpm; Sealed Speed Rating n3:5000 rpm; Grease Speed Rating Open/Shielded n1:8500 rpm; Basic Static Radial Load Rating Co:18000 N; d:50.000 mm;

D:155 mm; Mass housing washer:1.33 kg; D1:93 mm; B:13.5 mm; r1,2 min.:1.5 mm;

Accessories:Removable Metal Shie; Fillet Radius ra:1.00 mm; Oil Speed Rating Open/Shielded n2:10000 rpm; Sealed Speed Rating n3:5600 rpm; Grease Speed Rating Open/Shielded n1:8500 rpm; Basic Dynamic Radial Load Rating C:32500 N; d:40.000 mm; D:80.0000 mm; Basic Static Radial Load Rating Co:20000 N;

Oil Speed Rating n2:4500 rpm; Fillet Radius rb:1.00 mm; D:160.0000 mm; Basic Dynamic Radial Load Rating C:108000 N; B:30.00 mm; Grease Speed Rating n1:3400 rpm; d:90.000 mm; Fillet Radius ra:2.00 mm; Basic Static Radial Load Rating Co:95000 N;

Da:309.999 mm; P150°:113 kN; Eye bolt:2 x 3/8-16 UNC; S:4.763 mm; da:152.4 mm; R1:115.888 mm; PosiTrac Plus contact element:2 x B10724-140; J max.:549.275 mm; Cap bolt:1-8 UNC; P60°:345 kN;

N1:17.462 mm; d2:101.6 mm; da:63.5 mm; Limiting speed:3100 r/min; A1:88.106 mm; a:2.381 mm; S:0.794 mm; Basic dynamic load rating C:148 kN; L:174.625 mm; A6:25.4 mm;

Cap bolt:4 x 7/8-9 UNC; R1:122.237 mm; Bearing:23240 CCK/W33; J1:127 mm; Stabilizing ring:SR-40-34; Initial grease fill:2154.6 g; h:63.5 mm; P60°:364 kN; A2:358.775 mm; S:4.763 mm;

Dimension L:114.3 mm; Insert Bearing IB:Stainless Steel; Width A:41.3 mm; Dimension S1:30.0 mm; Basic Static Radial Load Rating Co:19000 N; Thread Diameter G:1/2-13; Shaft Diameter D:40 mm; Distance J:88.9 mm; Dimension F:19.1 mm; Basic Dynamic Radial Load Rating C:24700 N;

Mass needle roller:0.61 g; Dw:2.5 mm; r2 max.:0.8 mm; Lw:15.8 mm; r1 max.:0.6 mm; r1,2 min.:0.2 mm;

PG:1/8 NPT; Housing:FSAFS 517; H2:38.1 mm; Mass pillow block:24.5 kg; Adapter sleeve assembly:SNW 17x3; R1:53.975 mm; J1:53.975 mm; J max.:279.4 mm; Cap bolt, SAE grade:8; Initial grease fill:110.56 g;

Ca:108 mm; J6:470 mm; db:200 mm; da:180 mm; Q150°:1040 kN; Q180°:900 kN; Labyrinth seal:2 x TS 44; L:510 mm; N1:28 mm; Da:280 mm;

Grease Speed Rating n1:37000 rpm; d:25.000 mm; Basic Static Radial Load Rating Co:5300 N; B:9.00 mm; Basic Dynamic Radial Load Rating C:7610 N; Fillet Radius ra:0.30 mm; D:42.0000 mm; Fillet Radius rb:0.15 mm; Oil Speed Rating n2:53000 rpm;

Housing material:Cast iron; A1:14 mm; Mass bearing unit:1.65 kg; Limiting speed:950 r/min; J6:115.5 mm; Thread grub screw G2:1/4-28 UNF; B1:56.3 mm; d:40 mm; A3:3.2 mm; Fatigue load limit Pu:0.8 kN;